RegenesisInternational
Gold PTT 3.5 mL vial

Photo Boosters · by Simfle Stick Co., Ltd

Gold PTT

Gold microparticles for acne and enlarged pores

  • Gold microparticles driven into the pores with ultrasound
  • Activated by a 1064 nm long-pulsed Nd:YAG
  • Single-use 3.5 mL vial, one per patient

Request a quote

  • Protocol training included
  • Supplied by Regenesis

About

Gold PTT is a topical solution of gold microparticles for photothermal therapy of acne and enlarged pores. Applied with low-frequency ultrasound, the particles settle in the pilosebaceous unit; a 1064 nm long-pulsed Nd:YAG then heats them so the overactive sebaceous gland is targeted selectively while the surrounding skin is spared. The manufacturer describes it as a medium that facilitates laser treatment, not a stand-alone medication.

  • Gold PTT box
  • Gold PTT vial

Treatment possibilities

Indications from the manufacturer's documentation. Each links to the treatment page.

Recommendations

From physicians who use Gold PTT in practice.

  • Dr. Kingsley Mariadasan

  • CEO · Norway

    Dr. Kingsley Mariadasan explains why Gold PTT has a place in the treatment room.

How to use

Gold PTT in the treatment room, step by step.

  1. 01

    Cleanse

    Cleanse the face thoroughly. Protect the patient's eyes with gauze and goggles — the solution must not reach the eyes.

  2. 02

    Apply with sonophoresis

    Shake the vial and draw the solution into a syringe. Apply drop by drop, one area at a time, working it in with low-frequency ultrasound (40 kHz) for about ten minutes. The skin feels tacky when the particles have gone in.

  3. 03

    Wipe the surface

    Remove surplus solution gently with wet gauze. Hard rubbing pulls particles back out; skipping the wipe raises the risk of burns.

  4. 04

    Laser

    1064 nm long-pulsed Nd:YAG. Start at the manufacturer's standard setting (24 J/cm²), test-spot, and reduce to 20 then 10–15 J/cm² if the patient is uncomfortable. Serpentine passes with 20–30 % overlap, no stacking; about 10–12 minutes.

  5. 05

    Aftercare

    Cool compress if needed. No scrubs or bleaching creams for three days, avoid sun, SPF 30+. Dryness and light peeling for about a week is expected.

  6. 06

    Course

    Every two weeks, three to five sessions (every three weeks for sensitive skin, never more than four weeks apart). The manufacturer suggests a monthly maintenance session afterwards.

  • Gold PTT in the treatment room: application with ultrasound and the laser pass · Regenesis

Detailed information

Technology, indications and specifications as documented by Simfle Stick Co., Ltd.

Gold PTT particle: gold shell around a silica core with a PEG coating
Selective photothermolysis
Gold absorbs the 1064 nm beam and converts it to heat where the particles sit — in and around the sebaceous gland — so the laser can run at lower energy than it would on skin alone. The manufacturer's target is a skin temperature of 40–42 °C.
One laser
The manufacturer recommends the 1064 nm long-pulsed Nd:YAG only. 755 nm alexandrite does not activate the gold; 800 nm diode and Q-switched Nd:YAG are not recommended. LED, IPL, RF and HIFU are not substitutes.
Why two weeks
Unlike ablative resurfacing, the tissue is only warmed, so the manufacturer sets a two-week interval and a course of three to five sessions. Visible change is expected from the third session.
What to expect
Dryness and peeling for about a week, transient redness and swelling, and in some patients a temporary flare before improvement. Residual particles leave the skin with the sebum.
Rosacea
Beyond acne and pores, the manufacturer and a published three-patient case series describe use in refractory papulopustular rosacea with the same laser.
Delegation
Cleansing, application and wiping can be delegated; the laser step belongs to the trained laser operator.
Material
Gold shell on a silica core with a PEG coating, about 150 nm (manufacturer), in an alcohol-based solution
Activated by
1064 nm long-pulsed Nd:YAG
Standard setting (manufacturer)
24 J/cm², reduce to 20 then 10–15 J/cm² for comfort · 20–30 % overlap · no stacking
Delivery
Sonophoresis, 40 kHz (8–40 kHz acceptable), about 10 minutes
Target skin temperature
40–42 °C
Course
3–5 sessions, every 2 weeks (max 4 weeks apart); monthly maintenance
Vial
3.5 mL, single use, use within one day of opening
Pack
5 vials
Manufacturer
Simfle Stick Co., Ltd, Daegu, South Korea

Cautions

  • Allergy to metal or gold; allergy to alcohol
  • Laser contraindications apply: active infection, connective-tissue disease, impaired wound healing, photosensitising medication, recent sun or tanning
  • Wait 2–4 weeks after another laser treatment or peel in the same area
  • Disclose metal implants in the treatment area
  • Stop and seek medical advice on any adverse reaction

Publications

Product-specific evidence consists of case reports (seven patients across three papers). The two 2015 papers concern a different gold-microparticle product and are listed as background on the mechanism.

  • Gold nanoshell-mediated photothermal therapy for acne vulgaris — Dermatologic Therapy, 2020doi:10.1111/dth.13189
  • Gold photothermal therapy for refractory papulopustular rosacea: a case series — Photodermatology, Photoimmunology & Photomedicine, 2020doi:10.1111/phpp.12642
  • Gold nanoshell-mediated photothermal therapy for facial pores — Medical Lasers, 2019
  • Background: Acne treatment based on selective photothermolysis of sebaceous follicles with topically delivered light-absorbing gold microparticles — Journal of Investigative Dermatology, 2015doi:10.1038/jid.2015.89
  • Background: Ultrasonic delivery of silica–gold nanoshells for photothermolysis of sebaceous glands in humans — Journal of Controlled Release, 2015doi:10.1016/j.jconrel.2015.03.004

Talk to us

Book a demonstration of Gold PTT for your clinic.

More Photo Boosters

Back to Photo Boosters